Products / Eco pellet boilers / Biopel

Eco pellet boilers - Biopel

Eco pellet boilers - Biopel - DESCRIPTION:

NEW: The Biopel pellet boiler is a universal boiler which can be used with three kinds of burners: 16 kW, 24 kW and 30kW. The boiler is made of 6mm thick metal sheet and is distinguished by its original construction and design.
The Biopel boiler uses a modern method of heating based on biomass combustion - the combustion of wood pellets. The boiler is constructed as a unit consisting of the boiler, a stainless-steel burner, a pellet screw-feeder, an electronic controller and a feeding hopper (220 kg). The pellets are transported via a sloping screw-feeder from the hopper to the burner, where they are burned together with primary air drawn in by a blower. This is a fully automated heating system, including automatic ignition.

Eco pellet boilers - Biopel - TECHNICAL SPECIFICATIONS:

Type		Biopel 16	Biopel 24	Biopel 30	Biopel 60	Biopel 80
Maximum output	kW	16	24	30	60	80
Minimum output	kW	4	4	4	10% of the burner output
Guaranteed fuel	/	wood pellets 6-10 mm
Boiler efficiency	%	94	94	90	91.6	93
Average fuel consumption	kg/hour	2.5	2.5	3	6.5	8
Standard hopper volume	l	220
Burning time per one standard hopper volume	hour	72-110		63-95
Minimum operating chimney draught	Pa	10			10-15	10-15
Flue gas duct diameter	mm	130	130	130	150	180
Minimum chimney cross-section	mm	150	150	150	180	200
Junction pieces	DN	3/4"			1"	5/4"
Maximum operating overpressure	MPa	2.5
Maximum electric input/voltage	W/V	50/220		60/220	160/220	160/220
Average input during operation	W	40		50	50	60
Average electricity consumption per year	kWh/year	180		200	250	300
Efficiency class	/	3
Emission class	/	3
CO	mg/kW	143		104	157	217
OGC	mg/kW	7		4	8	7
Dust	mg/kW	16		24	32	31

BOILER AND BURNER PARAMETERS:

		Boink			Biopel
Burner power output	kW	16	24	30	16	24	30	60	80
Boiler height	mm	865	865	1005	1307			1272	1271
Boiler width	mm	400	400	500	515			643	743
Boiler depth	mm	724	724	740	750			896	997
Weight (boiler + burner)	kg	180	180	280	230			385	480
Flue gas duct diameter	mm	130	130	150	130			150	180
Flue gas duct distance from the ground	mm	635	635	757	887.5			998
Distance of input water junction piece from the ground	mm	99	99	99	276			270
Distance of output water junction piece from the ground	mm	781	781	921	1031			1121

STANDARD PELLET HOPPER (220 KG) PARAMETERS:

Height	mm	1300
Width	mm	815
Depth	mm	815
Weight	kg	32.5

EXTENDED PELLET HOPPER (350 KG) PARAMETERS:

Height	mm	1300
Width	mm	1420
Depth	mm	810
Weight	kg	38

SCREW-FEEDER PARAMETERS:

Length	mm	1860-3000
Diameter	mm	75
Slope angle	°	50
Weight	kg	7-12

Parameters affecting the operation and ignition of pellet boilers

Function of three-way and four-way valves - presentation to download
Note: Download as .zip and unpack. Then run the eseb.exe file.
It is necessary to have Adobe Flash Player installed. Free download is available here.

Pellet boiler installation

Operating instructions
Chip version 6 (.doc)
Chip version 4.99 (.pdf)

Calculate and compare your own home heating costs based on the type of fuel: http://www.tzb-info.sk/t.py?t=16&i=269

DYNAMIC HEATING CONTROLLER ADEX Comfort 06 (.doc )